RPC SERIES OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

________________________________________________________________________________

typing CONFIG” from the RPC > prompt to access the configuration menu. If you re- enter the new password correctly, the RPC returns to the main menu again, but you will not get an “Error” message.

Circuit Breaker : On

1) . . .

OUTLET 1

: Off

2) . . .

OUTLET 2

: Off

3) . . .

OUTLET 3

: On

4) . . .

OUTLET 4

: Off

5) . . .

OUTLET 5

: Off

6) . . .

OUTLET 6

: Off

RPC >

Disabling a Password To disable a password, enter a carriage return at the “Enter New Password” prompt. Enter another carriage return at the “Re-enter New Password” prompt. Changing the new password to a carriage return disables password protection

Change Outlet Name From the status menu’s RPC > prompt, type CONFIG. The following menu appears:

RPC > CONFIG

1). . . Change Password

2). . . Change Outlet Name

Enter Request:

34

Page 41
Image 41
HP R-2 MD01, R-2A, R-3A, R-2 RDR manual Rpc