HP R-2A, R-2 MD01, R-3A, R-2 RDR manual Unit Status, Reset Unit, Logout

RPC SERIES OWNER’S MANUAL

RPC SERIES QUICK START (RPC-3, RPC-3A, AND RPC-5)

________________________________________________________________________________

Access Default password is <cr>; disabled.

NOTE : If user name and password are disabled (default), outlet users will have access to all admin functions.

Outlets	Outlet Status display – Default is enabled
	Command Confirmation – Default is
	enabled
	Outlet Power-up Delay – programmable
	elapse time before applying power to an
	outlet after unit power-up, reset, or reboot.
	Default is 0.
	Name Outlets – Default name is Outlet 1,
	Outlet 2, …
	Display Outlet Users – A display of outlet
	user assignments. Default is no users
	assigned.
UNIT STATUS	The RPC sends a Unit Status Menu that
	provides vital information about the RPC;
	system status, network interface, logged user
	status, and outlet status. Select the number
	to review the status.
RESET UNIT	RESET UNIT allows changes to take effect.
	It will not set the unit to factory default. It
	will not disrupt power to the outlets
	currently energized.
LOGOUT	Ends the session.

11