HP R-2 RDR, R-2A, R-2 MD01, R-3A RPC Series Quick Start, RPC-2 and RPC-2A Quick Start, Operation

RPC SERIES OWNER’S MANUAL

RPC SERIES QUICK START (RPC-2 AND RPC-2A)

________________________________________________________________________________

RPC SERIES QUICK START

“Quick Start” is designed for users familiar with BayTech products who need a fast setup and familiarization. Detailed information on each of the functions and steps of operation and configuration may be found beginning at pages 19, 27, and 36 of this manual. Each “Quick Start” will discuss similar models.

RPC-2 AND RPC-2A QUICK START

EIA-232 serial	Using the 9FRJ45PC-1 adapter and the
connection	RJ08X007 cable, connect the serial port of
	your computer to the RJ-45 port labeled
	“EIA-232.”
	Load serial port communications software.
	Set serial communications parameters to
	9600 bps, 8 data bits, 1 stop bit, and no
	parity.
OPERATION
Accessing Main Menu	Power on the RPC unit. The following status
	menu appears:

RPC-2 Series

(C)1997 by BayTech

F2.07

Circuit Breaker : On

1) . . . OUTLET 1	: Off
2) . . . OUTLET 2	: Off
3) . . . OUTLET 3	: Off
4) . . . OUTLET 4	: Off
5) . . . OUTLET 5	: Off
6) . . . OUTLET 6	: Off
RPC >

2