Dell 9010 Removing the Heat-Sink Assembly, Installing the Heat-Sink Assembly, Removing the Input/Output Board Shield

6. Follow the procedures in After Working Inside Your Computer .
Removing the Heat-Sink Assembly
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
d) system-board shield
3. Remove the screws that secure the thermal module to the chassis. Lift the heat-sink assembly up and remove it
from the computer.
Installing the Heat-Sink Assembly
1. Align and place the heat-sink assembly on the computer.
2. Tighten the screws to secure the heat-sink assembly to the chassis.
3. Install:
a) system-board shield
b) VESA mount bracket
c) back cover
d) VESA stand
4. Follow the procedures in After Working Inside Your Computer .
Removing the Input/Output Board Shield
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
d) system-board shield
e) power-supply fan
3. Lift the input/output panel away from the computer.
24