Dell 9010 - page 46

Option Description

• Enable (selected by default) — User may enter OROM configuration screens

via the hotkey.

• One-Time Enable — User can enter the OROM configuration screens via the

hotkeys during the next boot. After the boot, the setting will revert to disabled.

• Disable — User can not enter the OROM configuration screens via the

hotkey.

Admin Setup Lockout Allows you to enable or disable the option to enter setup when an admin password is

set.

• Enable Admin Setup Lockout (selected by default)

Table 5. Performance

Option Description

Multi Core Support Specifies whether the process will have one or all cores enabled. The performance of

some applications will improve with the additional cores.

• All (selected by default)

• 1

• 2

Intel® SpeedStep™Allows you to enable or disable the Intel SpeedStep mode of the processor.

• Enable Intel(R) SpeedStep (selected by default)

C States Control Allows you to enable or disable the additional processor sleep states.

• C states (selected by default)

Intel® TurboBoost™Allows you to enable or disable Intel TurboBoost mode of the processor.

• Enable Intel TurboBoost (selected by default) — Allows the Intel TurboBoost

driver to increase the performance of the CPU or graphics processor.

HDD Protection Support This options allows users to enable and disable the HDD Protection feature.

• HDD Protection Support

46

Contents

Main Notes, Cautions, and Warnings Contents Page Page Page Working on Your Computer Before Working Inside Your Computer Turning Off Your Computer After Working Inside Your Computer Removing and Installing Components Recommended Tools Removing the VESA Stand Installing the VESA Stand Removing the Back Cover Installing the Back Cover Removing the Memory Installing the Memory Removing the VESA Mount Bracket Installing the VESA Mount Bracket Removing the Converter Board Installing the Converter Board Removing the System-Board Shield Installing the System-Board Shield Removing the Coin-Cell Battery Installing the Coin-Cell Battery Removing the Optical Drive Page Installing the Optical Drive Removing the Hard Drive Installing the Hard Drive Removing the Intrusion Switch Installing the Intrusion Switch Removing the Wireless Local Area Network (WLAN) Card Installing the WLAN Card Removing the Power-Supply Fan Installing the Power-Supply Fan Removing the Power Supply Unit (PSU) Installing the Power Supply Unit Removing the Heat-Sink Assembly Installing the Heat-Sink Assembly Removing the Input/Output Board Shield Page Page Installing the Input/Output Board Shield Removing the Power-Button Board Installing the Power-Button Board Removing the Processor Fan Installing the Processor Fan Removing the Processor Installing the Processor Removing the Speakers Installing the Speakers Removing the System Board Page Installing the System Board Jumper Settings Clearing the CMOS Password Disabling the Password System and Setup Password Removing the Display Panel Page Installing the Display Panel Removing the Antenna Modules Installing the Antenna Modules Removing the Camera Installing the Camera System Setup Boot Sequence Navigation Keys System Setup Options BIOS Setup Boot Support Page System Password Absolute Software Computrace Service Page Page Page Page Updating the BIOS System and Setup Password Assigning a System Password and Setup Password Deleting or Changing an Existing System and/or Setup Password Diagnostics Enhanced Pre-Boot System Assessment (ePSA) Diagnostics Power Supply Built in Self-Test Page Troubleshooting Your Computer Diagnostic Power LED Codes Beep Codes Error Messages Page Page Technical Specifications