RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
Enter the number of the outlet you want to change. If you want to change the name of Outlet 4, type the number 4 at the “Enter Request” prompt, followed by <cr>. The RPC responds:
Enter:
Enter a new receptacle name (maximum field length, 10 characters), followed by <cr>. If you want to change the name of Receptacle 4 from Outlet 4 to Router 1, type Router 1 from the “Enter” prompt, followed by <cr>. The RPC responds with the outlet name menu displaying the name change to Outlet 4:
| 1) . . . | OUTLET 1 |
| 2) . . . | OUTLET 2 |
| 3) . . . | OUTLET 3 |
| 4) . . . | Router 1 |
| 5) . . . | OUTLET 5 |
| 6) . . . | OUTLET 6 |
| Enter Request: | |
| To return to the RPC > prompt, press any | |
| key at the “Enter Request” prompt. | |
Enable/Disable | When a command is sent to TURN ON, | |
Confirmation | TURN OFF, OR REBOOT a receptacle, if | |
the enable/disable confirmation feature is enabled, the RPC responds, asking you to confirm the command. For example, if the command “ON 3” is sent, and the enable/disable confirmation is enabled, the RPC responds:
Turn On Outlet 3? (Y/N)
If the enable/disable feature is disabled, the
RPC will not ask to confirm the command.
25
