RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
| receptacle(s). When the command to | |
| REBOOT (n) is sent from the RPC > | |
| prompt, the RPC powers “Off” | |
| corresponding outlet(s) for approximately 10 | |
| seconds, then powers them up in sequence. | |
| This command only works on outlets which | |
| were “On” prior to the reboot. | |
| prior to receiving the reboot command. | |
Manage Users | Selection #2, “Manage Users,” from the | |
| main menu allows the admin user to add and | |
| delete users, change passwords, and change | |
| the outlet list that determines an outlet user’s | |
| access to prescribed outlets. | |
| From the main menu, select #2, “Manage | |
| Users.” The following menu appears: | |
| User Management Menu | |
| To modify existing user, enter number of user. | |
| To add/delete user, select appropriate menu choice. | |
| Enter request, CR to exit menus. | |
| 1) . . . | Add user |
| 2) . . . | admin |
| If this is not an initial setup and optional | |
| outlet users have been added, they too will | |
| show in the User Management Menu, along | |
| with the option to delete users. | |
| User Management Menu | |
| To modify existing user, enter number of user. | |
| To add/delete user, select appropriate menu choice. | |
| Enter request, CR to exit menus. | |
| 1) | . . . Add user |
| 2) | . . . Delete user |
| 3) | . . . admin |
| 4) | . . . engineering |
| 5) | . . . sales |
42