HP R-2A, R-2 MD01, R-3A, R-2 RDR manual Default Subnet Mask is 0.0.0.0. If you fail

RPC SERIES OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

________________________________________________________________________________

	address is 0.0.0.0. If you fail to enter the IP
	Address in dotted decimal form, the RPC
	responds again:
	Enter IP address in dotted decimal form:
	The RPC responds indefinitely with the
	same request until the IP Address in entered
	in the correct form.
Subnet Mask	The Subnet Mask consist of four bytes, each
	byte ranging from 0 to 255. This parameter
	must be programmed before the RPC can be
	accessed on a network.
	From the configuration menu, select #2,
	“Subnet Mask.” The RPC responds:
	Enter Subnet Mask in dotted decimal form:
	Enter the Subnet Mask (Example:
	255.255.255.0), followed by a carriage
	return. Upon entry of a carriage return, the
	RPC resumes the configuration menu.
	Default Subnet Mask is 0.0.0.0. If you fail
	to enter the subnet mask in dotted decimal
	form, the RPC responds again:
	Enter Subnet Mask in dotted decimal form:
	The RPC responds indefinitely with the
	same request until the Subnet Mask is
	entered in the correct form.
Gateway	The Gateway address consists of four bytes,
	each byte ranging from 0 to 255.
	From the configuration menu, select #3,
	“Gateway.” The RPC responds:
	Enter Gateway address in dotted decimal form:

48