HP R-2A, R-2 MD01, R-3A, R-2 RDR manual RPC Config

RPC SERIES OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

________________________________________________________________________________

Change Password	From the status menu’s RPC > prompt, type
	CONFIG. The following menu appears:
	RPC > CONFIG
	1) . . .	Change Password
	2) . . .	Change Outlet Name

Enter Request:

Select #1, “Change Password,” and press <Enter.> The RPC responds:

Enter Current Password:

Since the factory default password is a carriage return, press <cr>. If this is not an initial set-up and a password has already been set, enter the current password, followed by <cr>. If you enter the password incorrectly, the RPC responds with an “Error” message and returns to the main menu. Consequently, you must start over by typing “CONFIG” to access the configuration menu. If you enter the current password correctly, the RPC responds:

Enter New Password:

Enter a new password (maximum field length, 8 alphanumeric characters), followed by <cr>. The RPC responds:

Re-Enter New Password:

Re-enter the new password identically to the first entry. The password feature is case sensitive. If you fail to re-enter the new password correctly, the RPC responds with an “Error” message and returns to the main menu. Consequently, you must start over by

33