Symptom |
| Check/Remedy |
| |||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
Audio language and | • Audio language and subtitles will not work for DVDs not containing | |||||||
subtitles do not work. |
| them. And depending on the disc, they may work differently. | ||||||
Menu screen does not appear even | • Are you using a disc that does not contain menus? | |||||||
when the menu function is selected. | ||||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
Aspect ratio cannot be | • | You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX | ||||||
changed. |
| mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 | ||||||
| ratio only. Refer to the DVD disc jacket and then select the | |||||||
|
| appropriate function. | ||||||
|
|
|
|
|
| |||
The tape does not start | • The TAPE function has not been selected. | |||||||
playing | • The cassette has not been inserted correctly. | |||||||
| • The cassette player has not been closed. | |||||||
| • The tape is either slack or broken. | |||||||
|
|
|
|
|
| |||
The volume falls off | • The audio heads are dirty. | |||||||
The cassette is not erased correctly | • The rollers or drive capstans are dirty. | |||||||
There is excessive wow and flutter | • The tape is worn. | |||||||
|
|
|
|
|
| |||
Can't receive radio | • Is the antenna connected properly? | |||||||
broadcast. | • | If the antenna's input signal is weak, install an external FM | ||||||
antenna in an area with good reception. | ||||||||
|
|
|
|
|
|
|
| |
• The main unit is not working. | • | Turn off the power and hold the STOP |
| button on the main unit | ||||
(Example: The power goes out or |
| |||||||
| ||||||||
strange noise is heard.) |
| for longer than 5 seconds. | ||||||
|
|
|
|
|
|
| ||
• The DVD player is not | Using the RESET function will erase all stored settings. | |||||||
| ||||||||
working normally. | Do not use this unless necessary. | |||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
| • | While the player is in the No Disc mode, hold the main unit's STOP |
|
| ||||
|
| |||||||
The password for rating | button for longer than 5 seconds. “INITIAL” appears on the display and | |||||||
| all settings will return to the default values. | |||||||
level has been forgotten. | • Press the POWER button. | |||||||
| Using the RESET function will erase all stored settings. | |||||||
| Do not use this unless necessary. | |||||||
|
|
|
|
|
|
|
|
57