Timer
Function
ENG
•
The timer enables you to switch the system on or off at specific times.
• If you no longer want the system to be switched on or off automatically, you must cancel the timer.
• Before setting the timer, check that the current time is correct.
• For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
Switch the system |
| 2 | Press TIMER/ |
| CLOCK until | ||
on by pressing |
| TIMER is | |
1POWER. |
| displayed. | |
|
|
|
|
3 Press the ENTER button.
•ONTIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any
a. Set the hour by pressing 
or 
button.
•The minutes flash.
c.Set the minutes by pressing 
or 
button.
d.Press ENTER.
•OFFTIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch- off time already set; you can now set the timer
a. Set the hour by pressing
or 
button.
•The minutes flash.
c.Set the minutes by pressing 
or 
button.
d.Press ENTER.
•VOL 10 is displayed, where 10 corresponds to the volume already set.
Press 
or 
button
6to adjust the volume level and pressENTER.
•The source to be selected is displayed.
Press or button | 8 | Press ENTER to | |
| to select the source to | |||
| confirm the timer. | |||
be played when the | |||
| |||
| 7 system switches on. |
|
•TUNER (radio) :
a Press ENTER.b Select a preset station by pressing or .
•DVD/CD (compact disc) : Load on or more compact disc.
•TAPE(cassette): Insert a cassette tape.
•USB :Insert a USB.
Press POWER to
9 set the system to standby mode.•
is displayed to the top right of the time, indicating that the timer has been set.
•The system will switch on and off automatically at the required times.
DECK TAPE
Note | • If the timer switch on and off times are identical, the word ERROR is displayed. |
|
| ||
| If there is no tape, disc or usb, when you select the “DVD/CD, USB, it will automatically change | 48 |
| ||
| • to “TUNER”. | |
|
|