Gateway TWG870 Connections and Setup, Turning on the Wireless Voice Gateway, Phone/Fax Connection

Chapter 1: Connections and Setup

Fig. 5: Phone/Fax Connection

Turning on the Wireless Voice Gateway

If there is no lighted LEDs on the front panel, check the power on/off switch position on the back panel of Wireless Gateway: it must be ”ON” = “1”.

After installing the Wireless Voice Gateway and turn it on for the first time (and each time the modem is reconnected to the power), it goes through several steps before it can be used. Each of these steps is represented by a different pattern of flashing lights on the front of the modem.

Note: All indicators flash once before the initialization sequence.

22

Illustrations contained in this document are for representation only