
5: Commands and Levels
no key
show
show history
write
Note that quotes must enclose the value if it contains spaces.
Removes key.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
key 1
| apply wlan | Try out WLAN settings without saving them to Flash. | |
|
| If the settings do not work, when you reboot the device, | |
|
| it will still have the original settings. | |
| clrscrn | Clears the screen. | |
| exit | Exits to the next higher level. | |
| key <hexadecimal> | Sets key. | |
|
| Each byte is represented by two adjacent hex digits. | |
|
| Bytes may run together or be separated by optional punctuation: | |
|
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc | |
|
| Note that quotes must enclose the value if it contains spaces. | |
| key text <text> | Sets key. | |
|
| Each byte is represented by a single character. | |
|
| Note that quotes must enclose the value if it contains spaces. | |
| no key | Removes key. | |
| show | Shows the current configuration. | |
| show history | Displays the last 20 commands entered during the current CLI | |
|
| session. | |
| write | Stores the current configuration in permanent memory. | |
|
|
|
|
| key 2 |
| |
| apply wlan | Try out WLAN settings without saving them to Flash. | |
|
| If the settings do not work, when you reboot the device, | |
|
| it will still have the original settings. | |
| clrscrn | Clears the screen. | |
| exit | Exits to the next higher level. | |
| key <hexadecimal> | Sets key. | |
|
| Each byte is represented by two adjacent hex digits. | |
|
| Bytes may run together or be separated by optional punctuation: | |
|
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc | |
|
| Note that quotes must enclose the value if it contains spaces. | |
| key text <text> | Sets key. | |
|
| Each byte is represented by a single character. | |
|
| Note that quotes must enclose the value if it contains spaces. | |
| no key | Removes key. | |
| show | Shows the current configuration. | |
| show history | Displays the last 20 commands entered during the current CLI | |
|
| session. | |
| write | Stores the current configuration in permanent memory. |
key 2
apply wlan
clrscrn
exit
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device, it will still have the original settings.
Clears the screen.
Exits to the next higher level.
PremierWave EN Command Reference | 181 |