Lantronix 900-581 manual Dns dns level commands

	5: Commands and Levels
flush serial enable	Flushes serial data buffer when a tunneling connection is closed.
flush stop character disable	Forwards the stop character from the Line to the network.
flush stop character enable	Prevents the stop character from the Line from being forwarded to
	the network.
modem control disable	Does not watch the modem control pin to disconnect.
modem control enable	Watches the modem control pin and disconnects if it is not as-
	serted.
no stop character	Removes the stop character.
no timeout	Disables disconnect after timeout feature for tunneling sessions.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
stop character <control>	Sets the stop character.
	The character may be input as text, control, decimal, or hex.
	A control character has the form <control>C.
	A decimal value character has the form \99.
	A hex value character has the form 0xFF.
timeout <milliseconds>	Disconnects when no data has been received on the line (serial
	port) for the
	specified length of time.
	<milliseconds> = timeout in milliseconds.
write	Stores the current configuration in permanent memory.
disconnect (tunnel-disconnect:1) level commands
clrscrn	Clears the screen.
exit	Returns to the tunnel level.
flush serial disable	Does not flush serial data upon closing a tunneling connection.
flush serial enable	Flushes serial data buffer when a tunneling connection is closed.
flush stop character disable	Forwards the stop character from the Line to the network.
flush stop character enable	Prevents the stop character from the Line from being forwarded to
	the network.
modem control disable	Does not watch the modem control pin to disconnect.
modem control enable	Watches the modem control pin and disconnects if it is not as-
	serted.
no stop character	Removes the stop character.
no timeout	Disables disconnect after timeout feature for tunneling sessions.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
stop character <control>	Sets the stop character.
	The character may be input as text, control, decimal, or hex.
	A control character has the form <control>C.
	A decimal value character has the form \99.
	A hex value character has the form 0xFF.
timeout <milliseconds>	Disconnects when no data has been received on the line (serial
	port) for the
	specified length of time.
	<milliseconds> = timeout in milliseconds.
write	Stores the current configuration in permanent memory.
dns (dns) level commands
clrscrn	Clears the screen.

PremierWave EN Command Reference 75