| 5: Commands and Levels |
|
|
| session. |
show statistics | show connection statistics |
ssh username <text> | Sets the SSH user name for use when establishing tunneling |
| connections |
| with other devices. |
| <text> = SSH user name. |
tcp keep alive <milliseconds> | Enables TCP keep alive for connect mode tunneling and sets the |
| timer. |
| <milliseconds> = timer value, in milliseconds. |
validate certificate disable | Skips verification of the server certificate when connecting. |
validate certificate enable | Requires verification of the server certificate when connecting. |
vip disable | Makes connections using the specified Address. |
vip enable | Makes connections using the VIP name. |
vip name <text> | Sets the VIP name. |
write | Stores the current configuration in permanent memory. |
host 11 |
|
clrscrn | Clears the screen. |
default protocol | Restores the default value of the protocol (Telnet). |
default remote port | Sets the remote port (used to connect to the host) to the default |
| value, |
| which depends on the selected protocol. |
exit | Exits to the configuration level. |
host <number> | Change to config host level |
name <text> | Sets the name of the host. |
| <text> = name of the host. |
no name | Clears the name of the host. |
no remote address | Clears the remote address of the host. |
no ssh username | Clears the SSH username associated with the host. |
protocol ssh | Sets the protocol to SSH. |
protocol telnet | Sets the protocol to Telnet. |
remote address <text> | Sets the IP address of the remote host to connect to when this |
| host is |
| selected on the login connect menu. |
| <text> = IP address. |
remote port <number> | Sets the remote port used to connect to the host. |
| <number> = port to be used. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current CLI |
| session. |
ssh username <text> | Sets the username for logging into the host via SSH. |
| <text> = username. |
write | Stores the current configuration in permanent memory. |
host 12 | |
address <text> | Sets the remote host to establish tunneling connections with. |
| <text> = IP address or host name of the remote host. |
aes decrypt key <hexadecimal> | Sets the connect tunnel AES decrypt key with up to 16 bytes. |
| Each byte is represented by two adjacent hex digits. |
| Bytes may run together or be separated by optional punctuation: |
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc |
PremierWave EN Command Reference | 110 |
