Lantronix 900-581 manual Timeout milliseconds, Packing tunnel-packing2 level commands

	5: Commands and Levels
	A decimal value character has the form \99.
	A hex value character has the form 0xFF.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
threshold <bytes>	Sets the threshold (byte count). If the queued data reaches this
	threshold
	then the data will be sent.
	<bytes> = number of bytes in the threshold.
timeout <milliseconds>	Sets the timeout value for packing mode in milliseconds.
	<milliseconds> = timeout value, in milliseconds.
trailing character <control>	Sets the trailing character for packing mode.
	The character may be input as text, control, decimal, or hex.
	A control character has the form <control>C.
	A decimal value character has the form \99.
	A hex value character has the form 0xFF.
write	Stores the current configuration in permanent memory.
packing (tunnel-packing:2) level commands
clrscrn	Clears the screen.
default packing mode	Sets to default packing mode, which is "Disable"
default send character	Removes the send character for packing mode.
default threshold	Restores the default threshold.
default timeout	Restores the default packing mode timeout.
exit	Returns to the tunnel level.
no trailing character	Removes the trailing character for packing mode.
packing mode disable	Disables packing. Data is sent to the network when received.
packing mode send character	Sets packing mode to accumulate data and transmit it upon re-
	ceiving the
	configured send character on the line (serial port).
packing mode timeout	Sets packing mode to accumulate data and transmit it after a
	specified
	amount of time (timeout).
send character <control>	Sets the send character for packing mode.
	The character may be input as text, control, decimal, or hex.
	A control character has the form <control>C.
	A decimal value character has the form \99.
	A hex value character has the form 0xFF.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
threshold <bytes>	Sets the threshold (byte count). If the queued data reaches this
	threshold
	then the data will be sent.
	<bytes> = number of bytes in the threshold.
timeout <milliseconds>	Sets the timeout value for packing mode in milliseconds.
	<milliseconds> = timeout value, in milliseconds.
trailing character <control>	Sets the trailing character for packing mode.
	The character may be input as text, control, decimal, or hex.
	A control character has the form <control>C.
	A decimal value character has the form \99.
	A hex value character has the form 0xFF.
write	Stores the current configuration in permanent memory.

PremierWave EN Command Reference 194