
| 5: Commands and Levels |
|
|
| line. |
echo enable | Enables echoing of characters received on the line back to the |
| line. |
exit | Exits to the configuration level. |
exit connect menu disable | On the login connect menu, removes the menu item allowing the |
| user to exit |
| to the CLI. |
exit connect menu enable | On the login connect menu, inserts the menu item allowing the |
| user to exit |
| to the CLI. |
line <line> | Enters the line level. |
| <line> = number of the line (serial port) to be configured. |
login connect menu disable | Disables the login connect menu, so a user will get the CLI imme- |
| diately |
| after logging in. |
login connect menu enable | Enables the login connect menu, so a user will get the menu ra- |
| ther than the |
| CLI immediately after logging in. |
no send break | Removes the configured send break character. |
preview connect menu | Shows the layout of the connect menu with current settings. |
send break <control> | Sets the optional send break character. |
| <text> = the character. |
| The character may be input as text, control, decimal, or hex. |
| A control character has the form <control>C. |
| A decimal value character has the form \99. |
| A hex value character has the form 0xFF. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current CLI |
| session. |
terminal <line> | Enters the |
| <line> = number of the terminal line (serial port) to be configured. |
terminal network | Enters the |
terminal type <text> | Sets the terminal type. |
tunnel <line> | Enters the tunnel level. |
| <line> = number of the tunnel line (serial port) to be configured. |
write | Stores the current configuration in permanent memory. |
trusted authorities |
|
add | Adds an Authority Certificate. |
clrscrn | Clears the screen. |
exit | Exits to the ssl level. |
no intermediate authority <cert> | Removes an Intermediate Authority Certificate. |
| <cert> = index displayed by "show authority" command. |
no trusted authority <cert> | Removes a Trusted Authority Certificate. |
| <cert> = index displayed by "show authority" command. |
show | Displays Authority Certificate Information. |
show history | Displays the last 20 commands entered during the current CLI |
| session. |
write | Stores the current configuration in permanent memory. |
tunnel 1 (tunnel:1) level commands |
|
accept | Enters the accept level for this tunnel. |
PremierWave EN Command Reference | 205 |