| 5: Commands and Levels |
|
|
default protocol | Restores the default protocol as "TCP". |
default start character | Defaults the accept mode start character. |
default tcp keep alive | Restores the default 45 second accept mode TCP keep alive |
| timeout. |
email connect <number> | Sets an email profile to use to send an email alert upon establish- |
| ing |
| an accept mode tunnel. |
| <number> = the number of the email profile to use. |
email disconnect <number> | Sets an email profile to use to send an email alert upon closing |
| an accept mode tunnel. |
| <number> = the number of the email profile to use. |
exit | Returns to the tunnel level. |
flush serial disable | Characters already in the serial data buffer are retained upon es- |
| tablishing |
| an accept mode tunneling connection. |
flush serial enable | Flushes the serial data buffer upon establishing an accept mode |
| tunneling |
| connection. |
flush start character disable | Enables forwarding of the accept start character into the network. |
flush start character enable | Disables forwarding of the accept start character into the network. |
kill connection | Disconnects the active accept mode tunneling connection. |
local port <number> | Sets the port to use for accept mode tunneling. |
| <number> = number of the port to use. |
no aes decrypt key | Removes the accept tunnel AES decrypt key. |
no aes encrypt key | Removes the accept tunnel AES encrypt key. |
no credentials | Clears the RSA/DSA certificate selection. |
no email connect | Discontinues sending email alerts upon establishing an accept |
| mode tunnel. |
no email disconnect | Discontinues sending email alerts upon closing an accept mode |
| tunnel. |
no tcp keep alive | Disables the accept mode TCP keep alive timeout. |
password | Enters the next lower level. |
protocol ssh | Uses SSH protocol for accept mode tunneling. |
protocol ssl | Uses SSL protocol for accept mode tunneling. |
protocol tcp | Uses TCP protocol for accept mode tunneling. |
protocol tcp aes | Uses TCP protocol with AES encryption for accept mode tunnel- |
| ing. |
protocol telnet | Uses Telnet protocol (with IAC) for accept mode tunneling. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current CLI |
| session. |
show status | Displays tunnel accept status. |
start character <control> | Sets the accept mode start character. |
| The character may be input as text, control, decimal, or hex. |
| A control character has the form <control>C. |
| A decimal value character has the form \99. |
| A hex value character has the form 0xFF. |
tcp keep alive <milliseconds> | Enables TCP keep alive for accept mode tunneling and sets the |
| timer. |
| <milliseconds> = timer value, in milliseconds. |
PremierWave EN Command Reference | 54 |
