
| 5: Commands and Levels |
|
|
| <group> = the name for the new group. |
delete <cp> from <group> | Removes a CP from a specified group and sets the CP to its de- |
| fault |
| configuration of input. |
| <cp> = configurable pin. |
| <group> = the name of the group. |
delete <group> | Removes a group and resets all CPs in that group to the default |
| configuration of input. |
| <group> = the name of the group. |
disable <group> | Disables the specified group. |
| <group> = the name of the group. |
enable <group> | Enables a disabled group. |
| <group> = the name of the group. |
exit | Exits to the enable level. |
get <group> | Displays the value of the specified group. |
| <group> = the name of the group. |
set <cp> as input | Configures a CP as an asserted high input. |
| <cp> = configurable pin. |
set <cp> as input assert low | Configures a CP as an asserted low input. |
| <cp> = configurable pin. |
set <cp> as output | Configures a CP as an asserted high output. |
| <cp> = configurable pin. |
set <cp> as output assert low | Configures a CP as an asserted low output. |
| <cp> = configurable pin. |
set <group> <value> | Assigns a value to the specified group. |
| <group> = the name of the group. |
| <value> = numeric value to assign to the CP group. Can be speci- |
| fied as hex |
| if prepended with “0x”. |
show <group> | Displays group information for specified group. |
| <group> = the name of the group. |
show cp | Displays configuration and group information for all CPs. |
show groups | Displays all groups defined and their state. |
show history | Displays the last 20 commands entered during the current CLI |
| session. |
write | Stores the current configuration in permanent memory. |
credentials |
|
clrscrn | Clears the screen. |
create <credential name> | Create a new credential name |
delete <credential name> | Delete existing credential by name |
edit <credential name> | View or edit an existing profile |
exit | Exits to the ssl level. |
show | Show existing credential names |
show history | Displays the last 20 commands entered during the current CLI |
| session. |
write | Stores the current configuration in permanent memory. |
|
|
device (device) level commands |
|
auto show tlog | Continuously displays the internal trouble log. |
clrscrn | Clears the screen. |
exit | Exit to the enable level. |
PremierWave EN Command Reference | 73 |