| 5: Commands and Levels |
|
|
show history | Displays the last 20 commands entered during the current CLI |
| session. |
show status | Displays tunnel accept status. |
start character <control> | Sets the accept mode start character. |
| The character may be input as text, control, decimal, or hex. |
| A control character has the form <control>C. |
| A decimal value character has the form \99. |
| A hex value character has the form 0xFF. |
tcp keep alive <milliseconds> | Enables TCP keep alive for accept mode tunneling and sets the |
| timer. |
| <milliseconds> = timer value, in milliseconds. |
write | Stores the current configuration in permanent memory. |
accept |
|
accept mode always | Enables the tunneling server to always accept tunneling connec- |
| tions. |
accept mode any character | Enables the tunneling server to accept tunneling connections only |
| when a |
| character is received through the corresponding line (serial port). |
accept mode disable | Disables accept mode tunneling. |
accept mode modem control asserted | Enables the tunneling server to accept tunneling connections |
| when the modem |
| control pin is asserted. |
accept mode modem emulation | Enables modem emulation for accept mode tunneling. |
accept mode start character | Enables accept mode tunneling when the configured start charac- |
| ter |
| is received on the line. |
aes decrypt key <hexadecimal> | Sets the accept tunnel AES decrypt key with up to 16 bytes. |
| Each byte is represented by two adjacent hex digits. |
| Bytes may run together or be separated by optional punctuation: |
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc |
| Note that quotes must enclose the value if it contains spaces. |
aes decrypt key text <text> | Sets the accept tunnel AES decrypt key with up to 16 bytes. |
| Each byte is represented by a single character. |
| Note that quotes must enclose the value if it contains spaces. |
aes encrypt key <hexadecimal> | Sets the accept tunnel AES encrypt key with up to 16 bytes. |
| Each byte is represented by two adjacent hex digits. |
| Bytes may run together or be separated by optional punctuation: |
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc |
| Note that quotes must enclose the value if it contains spaces. |
aes encrypt key text <text> | Sets the accept tunnel AES encrypt key with up to 16 bytes. |
| Each byte is represented by a single character. |
| Note that quotes must enclose the value if it contains spaces. |
block network disable | Forwards (tunnels) network data in accept mode tunneling. |
block network enable | Discards all data coming in from the accept mode tunnel before |
| forwarding |
| it to the serial interface (generally used for debugging). |
block serial disable | Forwards (tunnels) serial data in accept mode tunneling. |
block serial enable | Discards all data coming in from the serial interface before for- |
| warding |
| it to the accept mode tunnel (generally used for debugging). |
clrscrn | Clears the screen. |
cp output | Enters the next lower level. |
credentials <text> | Selects the RSA/DSA certificates by name for the SSL server. |
PremierWave EN Command Reference | 51 |
