| 5: Commands and Levels |
|
|
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc |
| Note that quotes must enclose the value if it contains spaces. |
aes decrypt key text <text> | Sets the connect tunnel AES decrypt key with up to 16 bytes. |
| Each byte is represented by a single character. |
| Note that quotes must enclose the value if it contains spaces. |
aes encrypt key <hexadecimal> | Sets the connect tunnel AES encrypt key with up to 16 bytes. |
| Each byte is represented by two adjacent hex digits. |
| Bytes may run together or be separated by optional punctuation: |
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc |
| Note that quotes must enclose the value if it contains spaces. |
aes encrypt key text <text> | Sets the connect tunnel AES encrypt key with up to 16 bytes. |
| Each byte is represented by a single character. |
| Note that quotes must enclose the value if it contains spaces. |
auto show statistics | show connection statistics |
clrscrn | Clears the screen. |
credentials <text> | Selects the RSA/DSA certificates by name for the SSL client. |
default protocol | Restores the default protocol as "TCP". |
default tcp keep alive | Restores the default 45 second connect mode TCP keep alive |
| timeout. |
exit | Exits to the next higher level. |
no address | Removes the remote host address used to establish tunneling |
| connections. |
no aes decrypt key | Removes the connect tunnel AES decrypt key. |
no aes encrypt key | Removes the connect tunnel AES encrypt key. |
no credentials | Clears the RSA/DSA certificate selection. |
no port | Removes the remote port used to establish tunnel connections. |
no ssh username | Removes the SSH user name. |
no tcp keep alive | Disables the connect mode TCP keep alive timeout. |
no vip name | Removes the VIP name. |
port <number> | Sets the remote port to use for connect mode tunneling. |
| <number> = number of the port to use. |
protocol ssh | Uses SSH protocol for connect mode tunneling. |
protocol ssl | Uses SSL protocol for connect mode tunneling. |
protocol tcp | Uses TCP protocol for connect mode tunneling. |
protocol tcp aes | Uses TCP protocol with AES encryption for connect mode tunnel- |
| ing. |
protocol telnet | Uses Telnet protocol (with IAC) for connect mode tunneling. |
protocol udp | Uses UDP protocol for connect mode tunneling. |
protocol udp aes | Uses UDP protocol with AES encryption for connect mode tunnel- |
| ing. |
show | Shows the current configuration. |
show history | Displays the last 20 commands entered during the current CLI |
| session. |
show statistics | show connection statistics |
ssh username <text> | Sets the SSH user name for use when establishing tunneling |
| connections |
| with other devices. |
| <text> = SSH user name. |
tcp keep alive <milliseconds> | Enables TCP keep alive for connect mode tunneling and sets the |
PremierWave EN Command Reference | 155 |
