Lantronix 900-581 manual Host 14 tunnel-connect-host214 level commands

	5: Commands and Levels
	Note that quotes must enclose the value if it contains spaces.
auto show statistics	show connection statistics
clrscrn	Clears the screen.
credentials <text>	Selects the RSA/DSA certificates by name for the SSL client.
default protocol	Restores the default protocol as "TCP".
default tcp keep alive	Restores the default 45 second connect mode TCP keep alive
	timeout.
exit	Exits to the next higher level.
no address	Removes the remote host address used to establish tunneling
	connections.
no aes decrypt key	Removes the connect tunnel AES decrypt key.
no aes encrypt key	Removes the connect tunnel AES encrypt key.
no credentials	Clears the RSA/DSA certificate selection.
no port	Removes the remote port used to establish tunnel connections.
no ssh username	Removes the SSH user name.
no tcp keep alive	Disables the connect mode TCP keep alive timeout.
no vip name	Removes the VIP name.
port <number>	Sets the remote port to use for connect mode tunneling.
	<number> = number of the port to use.
protocol ssh	Uses SSH protocol for connect mode tunneling.
protocol ssl	Uses SSL protocol for connect mode tunneling.
protocol tcp	Uses TCP protocol for connect mode tunneling.
protocol tcp aes	Uses TCP protocol with AES encryption for connect mode tunnel-
	ing.
protocol telnet	Uses Telnet protocol (with IAC) for connect mode tunneling.
protocol udp	Uses UDP protocol for connect mode tunneling.
protocol udp aes	Uses UDP protocol with AES encryption for connect mode tunnel-
	ing.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
show statistics	show connection statistics
ssh username <text>	Sets the SSH user name for use when establishing tunneling
	connections
	with other devices.
	<text> = SSH user name.
tcp keep alive <milliseconds>	Enables TCP keep alive for connect mode tunneling and sets the
	timer.
	<milliseconds> = timer value, in milliseconds.
validate certificate disable	Skips verification of the server certificate when connecting.
validate certificate enable	Requires verification of the server certificate when connecting.
vip disable	Makes connections using the specified Address.
vip enable	Makes connections using the VIP name.
vip name <text>	Sets the VIP name.
write	Stores the current configuration in permanent memory.
host 14 (tunnel-connect-host:2:14) level commands
address <text>	Sets the remote host to establish tunneling connections with.

PremierWave EN Command Reference 120