| 5: Commands and Levels |
|
|
user <username> generate rsa 512 | Generate RSA public and private keys |
user <username> generate rsa 768 | Generate RSA public and private keys |
user <username> password <password> | Set username with password and optional RSA or DSA keys |
write | Stores the current configuration in permanent memory. |
|
|
configure (config) level commands |
|
arp | Changes to the command level for ARP configuration and status. |
bridge <instance> | Changes to the bridge configuration level. |
cli | Change to menu level for CLI configuration and status |
clrscrn | Clears the screen. |
diagnostics | Enters the diagnostics level. |
exit | Exits to the enable level. |
ftp | Enters the ftp level. |
host <number> | Change to config host level |
http | Enters the http level. |
icmp | Changes to the command level for ICMP configuration and status. |
if <instance> | Changes to the interface configuration level. |
ip | Changes to the command level for IP configuration and status. |
kill ssh <session> | Kills SSH session with index from "show sessions" |
kill telnet <session> | Kills Telnet session with index from "show sessions" |
query port | Enters the query port level. |
rss | Change to menu level for RSS configuration and status |
show | Displays system information. |
show history | Displays the last 20 commands entered during the current CLI |
| session. |
show lines | Displays line information. |
smtp | Changes to the command level for SMTP configuration and sta- |
| tus. |
syslog | Enters the syslog level. |
terminal <line> | Enters the |
| <line> = number of the terminal line (serial port) to be configured. |
terminal network | Enters the |
vip | Change to menu level for VIP configuration and status |
wlan profiles | Enters the WLAN profiles configuration level. |
write | Stores the current configuration in permanent memory. |
connect |
|
|
|
block network disable | Forwards (tunnels) network data in connect mode tunneling. |
block network enable | Discards all data coming in from the connect mode tunnel before |
| forwarding |
| it to the serial interface (generally used for debugging). |
block serial disable | Forwards (tunnels) serial data in connect mode tunneling. |
block serial enable | Discards all data coming in from the serial interface before for- |
| warding |
| it to the connect mode tunnel (generally used for debugging). |
clrscrn | Clears the screen. |
connect mode always | Enables the tunneling server to always establish tunneling con- |
| nections. |
PremierWave EN Command Reference | 60 |
