Lantronix 900-581 manual Commands and Levels, PremierWave EN Command Reference

	5: Commands and Levels
no aes encrypt key	Removes the connect tunnel AES encrypt key.
no credentials	Clears the RSA/DSA certificate selection.
no port	Removes the remote port used to establish tunnel connections.
no ssh username	Removes the SSH user name.
no tcp keep alive	Disables the connect mode TCP keep alive timeout.
no vip name	Removes the VIP name.
port <number>	Sets the remote port to use for connect mode tunneling.
	<number> = number of the port to use.
protocol ssh	Uses SSH protocol for connect mode tunneling.
protocol ssl	Uses SSL protocol for connect mode tunneling.
protocol tcp	Uses TCP protocol for connect mode tunneling.
protocol tcp aes	Uses TCP protocol with AES encryption for connect mode tunnel-
	ing.
protocol telnet	Uses Telnet protocol (with IAC) for connect mode tunneling.
protocol udp	Uses UDP protocol for connect mode tunneling.
protocol udp aes	Uses UDP protocol with AES encryption for connect mode tunnel-
	ing.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
show statistics	show connection statistics
ssh username <text>	Sets the SSH user name for use when establishing tunneling
	connections
	with other devices.
	<text> = SSH user name.
tcp keep alive <milliseconds>	Enables TCP keep alive for connect mode tunneling and sets the
	timer.
	<milliseconds> = timer value, in milliseconds.
validate certificate disable	Skips verification of the server certificate when connecting.
validate certificate enable	Requires verification of the server certificate when connecting.
vip disable	Makes connections using the specified Address.
vip enable	Makes connections using the VIP name.
vip name <text>	Sets the VIP name.
write	Stores the current configuration in permanent memory.
host 12 (config-host:12) level commands
clrscrn	Clears the screen.
default protocol	Restores the default value of the protocol (Telnet).
default remote port	Sets the remote port (used to connect to the host) to the default
	value,
	which depends on the selected protocol.
exit	Exits to the configuration level.
host <number>	Change to config host level
name <text>	Sets the name of the host.
	<text> = name of the host.
no name	Clears the name of the host.
no remote address	Clears the remote address of the host.
no ssh username	Clears the SSH username associated with the host.

PremierWave EN Command Reference 114