
| 5: Commands and Levels |
|
|
no username | Clears the user name. |
password <text> | Sets the value for the password. |
| <text> = put quotes around the characters (max 63). |
peap option | Sets the PEAP authentication protocol option to |
peap option | Sets the PEAP authentication protocol option to |
| V2. |
show | Shows the current configuration. |
show history | Displays the last 20 commands entered during the current CLI |
| session. |
username <text> | Sets the value of the username. |
| <text> = value in characters (max 63). |
validate certificate disable | Skips verification of the server certificate when connecting. |
validate certificate enable | Requires verification of the server certificate when connecting. |
write | Stores the current configuration in permanent memory. |
wpax | |
apply wlan | Try out WLAN settings without saving them to Flash. |
| If the settings do not work, when you reboot the device, |
| it will still have the original settings. |
authentication 802.1x | Sets the authentication method to IEEE 802.1x. |
authentication psk | Sets the authentication method to PSK. |
clrscrn | Clears the screen. |
credentials <text> | Selects the RSA certificate by configured name. |
default authentication | Restores the authentication method to the default value (PSK). |
default | Restores the |
| MSCHAP V2). |
default encryption | Restores the encryption type to the default value (none enabled). |
default ieee 802.1x | Restores the default IEEE 802.1x protocol, |
default peap option | Restores the PEAP authentication protocol options to the default |
|
|
Sets the | |
Sets the | |
Sets the | |
| MSCHAP V2. |
Sets the | |
Sets the | |
| V2. |
Sets the | |
encryption ccmp disable | Disables this encryption method. |
encryption ccmp enable | Enables this encryption method. |
encryption tkip disable | Disables this encryption method. |
encryption tkip enable | Enables this encryption method. |
encryption wep disable | Disables this encryption method. |
encryption wep enable | Enables this encryption method. |
exit | Exits to the next higher level. |
ieee 802.1x | Sets the IEEE 802.1x protocol to |
ieee 802.1x | Sets the IEEE 802.1x protocol to |
ieee 802.1x leap | Sets the IEEE 802.1x protocol to LEAP. |
PremierWave EN Command Reference | 210 |