Lantronix 900-581 manual Serial tunnel-serial3 level commands

5: Commands and Levels

show

show history

suite none

suite wep

suite wpa

suite wpa2

wep

wpax

write

ters or more for

maximum security. Spaces and punctuation characters are per- mitted.

Displays the current configuration.

Displays the last 20 commands entered during the current CLI session.

Sets the security suite to None.

Sets the security suite to WEP.

Sets the security suite to WPA.

Sets the security suite to WPA2.

Enters the next lower level.

Enters the next lower level.

Stores the current configuration in permanent memory.

security (config-profile-security:default_adhoc_profile) level commands

advanced	Switch to advanced level
apply wlan	Try out WLAN settings without saving them to Flash.
	If the settings do not work, when you reboot the device,
	it will still have the original settings.
basic	Switch to basic level
clrscrn	Clears the screen.
default key type	Restores the key type to the default value (passphrase).
default suite	Restores the security method (suite) to the default value (None).
exit	Exit to the profiles level
key type hex	Sets the key type to hex.
key type passphrase	Sets the key type to passphrase.
no passphrase	Removes the passphrase.
passphrase <text>	Sets the passphrase. Maximum 63 characters.
	<text> = put quotes around characters that make up the pass-
	phrase.
	Please refer to the other equipment’s manual to determine the
	passphrase
	input style recommended.
	NOTE: Lantronix recommends using a passphrase of 20 charac-
	ters or more for
	maximum security. Spaces and punctuation characters are per-
	mitted.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
suite none	Sets the security suite to None.
suite wep	Sets the security suite to WEP.
suite wpa	Sets the security suite to WPA.
suite wpa2	Sets the security suite to WPA2.
wep	Enters the next lower level.
wpax	Enters the next lower level.
write	Stores the current configuration in permanent memory.
serial (tunnel-serial:3) level commands

clrscrn

Clears the screen.

PremierWave EN Command Reference 198