Release Notes
IPIX IP Cameras Supported on Digital Sentry
Integral Digital Sentry® digital video management systems (DVMS) support certain IPIX® IP camera models. The camera models listed in this document can be used with Digital Sentry IP camera driver 6.8.0.126 and later. Refer to each camera’s table for information about the hardware and software features validated for use on a Digital Sentry system. Any general limitations or special instructions are listed at the beginning of the document, and any
To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer to the Pelco Web site at www.pelco.com.
IPIX CommandView™ Dome CV-D2000
Firmware | N/A |
|
|
Supported Resolutions | 1600 x 1200 |
|
|
Frames per Second (FPS) | 1 to 20 |
|
|
Number of Quality Settings | 10 |
|
|
Supported Codec | MJPEG |
|
|
Supported Motion Detection | |
|
|
Pan/Tilt/Zoom (PTZ) | Yes (solid state) |
|
|
IPIX CommandView Dome CV-D3000
Firmware | N/A |
|
|
|
|
Supported Resolutions | 2048 x 1536 |
|
|
|
|
FPS | 1 to 12 |
|
|
|
|
Number of Quality Settings | 10 |
|
|
|
|
Supported Codec | MJPEG |
|
|
|
|
Supported Motion Detection |
| |
|
|
|
PTZ | Yes (solid state) |
|
|
|
|
C1006RN (1/09) |
| Page 1 of 2 |
