Lantronix 900-581 manual Commands and Levels, PremierWave EN Command Reference

	5: Commands and Levels
validate certificate disable	Skips verification of the server certificate when connecting.
validate certificate enable	Requires verification of the server certificate when connecting.
vip disable	Makes connections using the specified Address.
vip enable	Makes connections using the VIP name.
vip name <text>	Sets the VIP name.
write	Stores the current configuration in permanent memory.
host 6 (config-host:6) level commands
clrscrn	Clears the screen.
default protocol	Restores the default value of the protocol (Telnet).
default remote port	Sets the remote port (used to connect to the host) to the default
	value,
	which depends on the selected protocol.
exit	Exits to the configuration level.
host <number>	Change to config host level
name <text>	Sets the name of the host.
	<text> = name of the host.
no name	Clears the name of the host.
no remote address	Clears the remote address of the host.
no ssh username	Clears the SSH username associated with the host.
protocol ssh	Sets the protocol to SSH.
protocol telnet	Sets the protocol to Telnet.
remote address <text>	Sets the IP address of the remote host to connect to when this
	host is
	selected on the login connect menu.
	<text> = IP address.
remote port <number>	Sets the remote port used to connect to the host.
	<number> = port to be used.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
ssh username <text>	Sets the username for logging into the host via SSH.
	<text> = username.
write	Stores the current configuration in permanent memory.
host 7 (tunnel-connect-host:3:7) level commands
address <text>	Sets the remote host to establish tunneling connections with.
	<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>	Sets the connect tunnel AES decrypt key with up to 16 bytes.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punctuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains spaces.
aes decrypt key text <text>	Sets the connect tunnel AES decrypt key with up to 16 bytes.
	Each byte is represented by a single character.
	Note that quotes must enclose the value if it contains spaces.
aes encrypt key <hexadecimal>	Sets the connect tunnel AES encrypt key with up to 16 bytes.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punctuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains spaces.
aes encrypt key text <text>	Sets the connect tunnel AES encrypt key with up to 16 bytes.

PremierWave EN Command Reference 163