Lantronix 900-581 manual Commands and Levels, PremierWave EN Command Reference, commands, each

	5: Commands and Levels
write	Stores the current configuration in permanent memory.
advanced (config-profile-advanced:test1) level	commands
antenna diversity antenna 1	Set antenna selection to 1
antenna diversity antenna 2	Set antenna selection to 2
antenna diversity enabled	Set antenna diversity to enabled.
apply wlan	Try out WLAN settings without saving them to Flash.
	If the settings do not work, when you reboot the device,
	it will still have the original settings.
basic	Switch to basic level
clrscrn	Clears the screen.
default antenna diversity	Restore the default value for antenna diversity.
default power management interval	Restores the power management interval to the default value (1
	beacon).
default tx data rate	Restores the TX data rate to the default value (auto-reduction).
default tx data rate maximum	Restores the maximum TX data rate to the default value (54
	Mbps).
default tx power maximum	Restores the maximum TX power to the default value (14 dBm).
exit	Exit to the profiles level
power management disable	Disables power management.
power management enable	Enables power management.
power management interval <beacons (100 ms	Sets the power management time interval in beacons. (A beacon
each)>	is 100 msec.)
security	Switch to security level
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
tx data rate auto-reduction	Enables TX data rate auto-reduction.
tx data rate fixed	Enables a fixed data rate.
tx data rate maximum 1 mbps	Sets the data rate maximum to 1 Mbps.
tx data rate maximum 11 mbps	Sets the data rate maximum to 11 Mbps.
tx data rate maximum 12 mbps	Sets the data rate maximum to 12 Mbps.
tx data rate maximum 18 mbps	Sets the data rate maximum to 18 Mbps.
tx data rate maximum 2 mbps	Sets the data rate maximum to 2 Mbps.
tx data rate maximum 24 mbps	Sets the data rate maximum to 24 Mbps.
tx data rate maximum 36 mbps	Sets the data rate maximum to 36 Mbps.
tx data rate maximum 48 mbps	Sets the data rate maximum to 48 Mbps.
tx data rate maximum 5.5 mbps	Sets the data rate maximum to 5.5 Mbps.
tx data rate maximum 54 mbps	Sets the data rate maximum to 54 Mbps.
tx data rate maximum 6 mbps	Sets the data rate maximum to 6 Mbps.
tx data rate maximum 9 mbps	Sets the data rate maximum to 9 Mbps.
tx data rate maximum mcs0	Sets the data rate maximum to MCS0.
tx data rate maximum mcs1	Sets the data rate maximum to MCS1.
tx data rate maximum mcs2	Sets the data rate maximum to MCS2.
tx data rate maximum mcs3	Sets the data rate maximum to MCS3.
tx data rate maximum mcs4	Sets the data rate maximum to MCS4.
tx data rate maximum mcs5	Sets the data rate maximum to MCS5.

PremierWave EN Command Reference 55