Lantronix 900-581 manual Modem tunnel-modem2 level commands, Modem tunnel-modem1 level commands

	5: Commands and Levels
response type numeric	Uses numeric type responses.
response type text	Uses text type responses.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
show status	Displays tunnel modem status.
verbose response disable	Does not send Modem Response Codes.
verbose response enable	Sends Modem Response Codes out on the Serial Line.
write	Stores the current configuration in permanent memory.
modem (tunnel-modem:2) level commands
clrscrn	Clears the screen.
connect string <text>	Sets the CONNECT string used in modem emulation.
	<string> = connect string.
default incoming connection	Default disables incoming network connections.
default response type	Default uses text type responses.
display remote ip disable	The incoming RING has nothing following it.
display remote ip enable	The incoming RING is followed by the IP address of the caller.
echo commands disable	Does not echo modem commands.
echo commands enable	Echoes modem commands.
echo pluses disable	Does not echo the +++ characters when entering modem com-
	mand mode.
echo pluses enable	Echoes the +++ characters when entering modem command
	mode.
error unknown commands disable	Returns OK on unknown AT commands.
error unknown commands enable	Returns an error upon unknown AT commands.
exit	Returns to the tunnel level.
incoming connection automatic	Automatically answer incoming network connections.
incoming connection disabled	Disable incoming network connections.
incoming connection manual	Wait for an ATA command before answering an incoming network
	connection.
no connect string	Removes optional CONNECT string information for modem emu-
	lation.
reassert	Asserts tunnel modem status with current configured values.
response type numeric	Uses numeric type responses.
response type text	Uses text type responses.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
show status	Displays tunnel modem status.
verbose response disable	Does not send Modem Response Codes.
verbose response enable	Sends Modem Response Codes out on the Serial Line.
write	Stores the current configuration in permanent memory.
modem (tunnel-modem:1) level commands
clrscrn	Clears the screen.
connect string <text>	Sets the CONNECT string used in modem emulation.
	<string> = connect string.

PremierWave EN Command Reference 192