Lantronix 900-581 manual Commands and Levels, PremierWave EN Command Reference, lookup hostorip

	5: Commands and Levels
exit	Exits to the enable level.
lookup <host_or_ip>	Return a lookup on the DNS name or IP address.
show	Show DNS status.
show history	Displays the last 20 commands entered during the current CLI
	session.
write	Stores the current configuration in permanent memory.
edit 1 (config-profile-basic:default_adhoc_profile) level commands
advanced	Switch to advanced level
apply wlan	Try out WLAN settings without saving them to Flash.
	If the settings do not work, when you reboot the device,
	it will still have the original settings.
channel <number>	Sets the radio channel for AdHoc.
	<number> = number of the radio channel.
clrscrn	Clears the screen.
default channel	Restores the default value to the radio channel.
default topology	Restores the default topology, which is Infrastructure.
exit	Exit to the profiles level
network name <text>	Sets the network name.
no network name	Clears the network name.
scan 2.4 ghz band disable	Disables scanning of the 2.4 GHz band for this profile.
scan 2.4 ghz band enable	Enables scanning of the 2.4 GHz band for this profile.
scan 5 ghz band disable	Disables scanning of the 5 GHz band for this profile.
scan 5 ghz band enable	Enables scanning of the 5 GHz band for this profile.
scan dfs channels disable	Disables scanning of the DFS channels (5 GHz band) for this pro-
	file.
scan dfs channels enable	Enables scanning of the DFS channels (5 GHz band) for this pro-
	file.
security	Switch to security level
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
state disable	Disables this profile.
state enable	Enables this profile.
topology adhoc	Sets topology to Adhoc.
topology infrastructure	Sets topology to Infrastructure.
write	Stores the current configuration in permanent memory.
edit 2 (config-profile-basic:test1) level commands
advanced	Switch to advanced level
apply wlan	Try out WLAN settings without saving them to Flash.
	If the settings do not work, when you reboot the device,
	it will still have the original settings.
channel <number>	Sets the radio channel for AdHoc.
	<number> = number of the radio channel.
clrscrn	Clears the screen.
default channel	Restores the default value to the radio channel.
default topology	Restores the default topology, which is Infrastructure.
exit	Exit to the profiles level

PremierWave EN Command Reference 76