
| 5: Commands and Levels |
|
|
default incoming connection | Default disables incoming network connections. |
default response type | Default uses text type responses. |
display remote ip disable | The incoming RING has nothing following it. |
display remote ip enable | The incoming RING is followed by the IP address of the caller. |
echo commands disable | Does not echo modem commands. |
echo commands enable | Echoes modem commands. |
echo pluses disable | Does not echo the +++ characters when entering modem com- |
| mand mode. |
echo pluses enable | Echoes the +++ characters when entering modem command |
| mode. |
error unknown commands disable | Returns OK on unknown AT commands. |
error unknown commands enable | Returns an error upon unknown AT commands. |
exit | Returns to the tunnel level. |
incoming connection automatic | Automatically answer incoming network connections. |
incoming connection disabled | Disable incoming network connections. |
incoming connection manual | Wait for an ATA command before answering an incoming network |
| connection. |
no connect string | Removes optional CONNECT string information for modem emu- |
| lation. |
reassert | Asserts tunnel modem status with current configured values. |
response type numeric | Uses numeric type responses. |
response type text | Uses text type responses. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current CLI |
| session. |
show status | Displays tunnel modem status. |
verbose response disable | Does not send Modem Response Codes. |
verbose response enable | Sends Modem Response Codes out on the Serial Line. |
write | Stores the current configuration in permanent memory. |
|
|
packing |
|
clrscrn | Clears the screen. |
default packing mode | Sets to default packing mode, which is "Disable" |
default send character | Removes the send character for packing mode. |
default threshold | Restores the default threshold. |
default timeout | Restores the default packing mode timeout. |
exit | Returns to the tunnel level. |
no trailing character | Removes the trailing character for packing mode. |
packing mode disable | Disables packing. Data is sent to the network when received. |
packing mode send character | Sets packing mode to accumulate data and transmit it upon re- |
| ceiving the |
| configured send character on the line (serial port). |
packing mode timeout | Sets packing mode to accumulate data and transmit it after a |
| specified |
| amount of time (timeout). |
send character <control> | Sets the send character for packing mode. |
| The character may be input as text, control, decimal, or hex. |
| A control character has the form <control>C. |
PremierWave EN Command Reference | 193 |