Lantronix 900-581 Commands and Levels, PremierWave EN Command Reference, cpm cpm level commands

	5: Commands and Levels
connection value <number>	Sets the value to output to the CP Group upon connect mode
	connection.
	<number> = binary to output (typically 1 or 0).
default connection value	Restores the default value for connect mode connection.
default disconnection value	Restores the default value for connect mode disconnection.
disconnection value <number>	Sets the value to output to the CP Group upon connect mode
	disconnection.
	<number> = binary to output (typically 1 or 0).
exit	Exits to the next higher level.
group <text>	Configures the CP Group to set upon making or breaking a con-
	nect
	mode connection.
	<text> = CP Group.
no group	Removes the CP Set Group for connect mode.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
write	Stores the current configuration in permanent memory.
cp output (tunnel-accept-cp_output:1) level commands
clrscrn	Clears the screen.
connection value <number>	Sets the value to output to the CP Group upon accept mode con-
	nection.
	<number> = binary to output (typically 1 or 0).
default connection value	Restores the default value for accept mode connection.
default disconnection value	Restores the default value for accept mode disconnection.
disconnection value <number>	Sets the value to output to the CP Group upon accept mode dis-
	connection.
	<number> = binary to output (typically 1 or 0).
exit	Exits to the next higher level.
group <text>	Configures the CP Group to set upon making or breaking an ac-
	cept
	mode connection.
	<text> = CP Group.
no group	Removes the CP Set Group for accept mode.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
write	Stores the current configuration in permanent memory.
cpm (cpm) level commands
add <cp> to <group>	Adds the specified CP to the specified group.
	<cp> = configurable pin.
	<group> = the name of the group to which you want to add the
	CP.
add <cp> to <group> <bit>	Adds a specified CP to a specified group at a specified bit posi-
	tion.
	<cp> = configurable pin.
	<group> = the name of the group to which you want to add the
	CP.
	<bit> = bit position.
clrscrn	Clears the screen.
create <group>	Creates a configurable pin (CP) group.

PremierWave EN Command Reference 72