| 5: Commands and Levels |
|
|
| above it, |
| to adjust the order of the defined hosts. |
reconnect time <milliseconds> | Sets the reconnect time value for tunneling connections estab- |
| lished by the |
| device in milliseconds. |
| <milliseconds> = timeout in milliseconds. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current CLI |
| session. |
show status | Displays tunnel connect status. |
start character <control> | Sets the connect mode start character. |
| The character may be input as text, control, decimal, or hex. |
| A control character has the form <control>C. |
| A decimal value character has the form \99. |
| A hex value character has the form 0xFF. |
write | Stores the current configuration in permanent memory. |
|
|
connect |
|
block network disable | Forwards (tunnels) network data in connect mode tunneling. |
block network enable | Discards all data coming in from the connect mode tunnel before |
| forwarding |
| it to the serial interface (generally used for debugging). |
block serial disable | Forwards (tunnels) serial data in connect mode tunneling. |
block serial enable | Discards all data coming in from the serial interface before for- |
| warding |
| it to the connect mode tunnel (generally used for debugging). |
clrscrn | Clears the screen. |
connect mode always | Enables the tunneling server to always establish tunneling con- |
| nections. |
connect mode any character | Enables the tunneling server to establish a tunneling connection |
| when a |
| character is received on the corresponding line (serial port). |
connect mode disable | Disables connect mode tunneling. |
connect mode modem control asserted | Enables the tunneling server to make tunneling connections when |
| the modem |
| control pin is asserted. |
connect mode modem emulation | Enables modem emulation for connect mode tunneling. |
connect mode start character | Enables connect mode tunneling when the configured start char- |
| acter |
| is received on the line. |
cp output | Enters the next lower level. |
default connect mode | Restores the default connect mode as "disable". |
default host mode | Connects to the first host in the list that accepts the connection. |
default local port | Uses a random port number as the local port for establishing tun- |
| neling |
| connections to other devices. |
default reconnect time | Restores the default reconnect time value for connect mode tun- |
| neling. |
default start character | Defaults the connect mode start character. |
email connect <number> | Sets an email profile to use to send an email alert upon establish- |
| ing |
| a connect mode tunnel. |
PremierWave EN Command Reference | 62 |
