Lantronix 900-581 manual Commands and Levels, Accept tunnel-accept3 level commands

5: Commands and Levels

•host 11 (tunnel-connect-host:3:11)

•host 12 (tunnel-connect-host:3:12)

•host 13 (tunnel-connect-host:3:13)

•host 14 (tunnel-connect-host:3:14)

•host 15 (tunnel-connect-host:3:15)

•host 16 (tunnel-connect-host:3:16)

•disconnect (tunnel-disconnect:3)

•modem (tunnel-modem:3)

•packing (tunnel-packing:3)

•serial (tunnel-serial:3)

•xml (xml)

	Table 5-1 Commands and Levels
accept (tunnel-accept:3) level commands
accept mode always		Enables the tunneling server to always accept tunneling connec-
		tions.
accept mode any character		Enables the tunneling server to accept tunneling connections only
		when a
		character is received through the corresponding line (serial port).
accept mode disable		Disables accept mode tunneling.
accept mode modem control asserted		Enables the tunneling server to accept tunneling connections
		when the modem
		control pin is asserted.
accept mode modem emulation		Enables modem emulation for accept mode tunneling.
accept mode start character		Enables accept mode tunneling when the configured start charac-
		ter
		is received on the line.
aes decrypt key <hexadecimal>		Sets the accept tunnel AES decrypt key with up to 16 bytes.
		Each byte is represented by two adjacent hex digits.
		Bytes may run together or be separated by optional punctuation:
		123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
		Note that quotes must enclose the value if it contains spaces.
aes decrypt key text <text>		Sets the accept tunnel AES decrypt key with up to 16 bytes.
		Each byte is represented by a single character.
		Note that quotes must enclose the value if it contains spaces.
aes encrypt key <hexadecimal>		Sets the accept tunnel AES encrypt key with up to 16 bytes.
		Each byte is represented by two adjacent hex digits.
		Bytes may run together or be separated by optional punctuation:
		123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
		Note that quotes must enclose the value if it contains spaces.
aes encrypt key text <text>		Sets the accept tunnel AES encrypt key with up to 16 bytes.
		Each byte is represented by a single character.
		Note that quotes must enclose the value if it contains spaces.
block network disable		Forwards (tunnels) network data in accept mode tunneling.
block network enable		Discards all data coming in from the accept mode tunnel before
		forwarding
		it to the serial interface (generally used for debugging).
block serial disable		Forwards (tunnels) serial data in accept mode tunneling.
block serial enable		Discards all data coming in from the serial interface before for-

PremierWave EN Command Reference 49