Lantronix 900-581 manual Smtp config-smtp level commands, Ssh ssh level commands

	5: Commands and Levels
host generate dsa 768	Generate DSA public and private keys
host generate rsa 1024	Generate RSA public and private keys
host generate rsa 512	Generate RSA public and private keys
host generate rsa 768	Generate RSA public and private keys
host keys	Sets RSA or DSA public and/or private keys
no host dsa	Removes DSA public and private keys
no host rsa	Removes RSA public and private keys
show	Show SSH Server settings
show authorized user <username>	Show information for an authorized user
show history	Displays the last 20 commands entered during the current CLI
	session.
show host dsa	Show full DSA public key
show host rsa	Show full RSA public key
write	Stores the current configuration in permanent memory.
smtp (config-smtp) level commands
clrscrn	Clears the screen.
default relay port	Restores the SMTP relay port to its default.
exit	Exits to the configuration level.
no relay address	Removes the SMTP relay address.
relay address <text>	Sets an SMTP relay address to direct all outbound email messag-
	es through
	a mail server.
relay port <number>	Sets the SMTP relay port.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
write	Stores the current configuration in permanent memory.
ssh (ssh) level commands
client	Enters the SSH Client configuration level.
clrscrn	Clears the screen.
exit	Exits to the enable level.
server	Enters the SSH Server configuration level.
show history	Displays the last 20 commands entered during the current CLI
	session.
write	Stores the current configuration in permanent memory.
ssh (config-cli-ssh) level commands
clrscrn	Clears the screen.
default max sessions	Restores the default maximum allowed concurrent incoming SSH
	sessions.
default port	Restores the default local port to the SSH server.
exit	Exits to the CLI level.
max sessions <number>	Sets the maximum allowed concurrent incoming SSH sessions.
	<number> = number of sessions.
port <number>	Sets the local port that the SSH server uses.
	<number> = local port number.
show	Displays the current configuration.

PremierWave EN Command Reference 200