Lantronix 900-581 manual Key 3 config-profile-security-wep-keytest13 level commands

5: Commands and Levels

key <hexadecimal>	Sets key.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punctuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains spaces.
key text <text>	Sets key.
	Each byte is represented by a single character.
	Note that quotes must enclose the value if it contains spaces.
no key	Removes key.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
write	Stores the current configuration in permanent memory.
key 3 (config-profile-security-wep-key:test1:3) level commands
apply wlan	Try out WLAN settings without saving them to Flash.
	If the settings do not work, when you reboot the device,
	it will still have the original settings.
clrscrn	Clears the screen.
exit	Exits to the next higher level.
key <hexadecimal>	Sets key.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punctuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains spaces.
key text <text>	Sets key.
	Each byte is represented by a single character.
	Note that quotes must enclose the value if it contains spaces.
no key	Removes key.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
write	Stores the current configuration in permanent memory.
key 3 (config-profile-security-wep-key:default_adhoc_profile:3) level commands
apply wlan	Try out WLAN settings without saving them to Flash.
	If the settings do not work, when you reboot the device,
	it will still have the original settings.
clrscrn	Clears the screen.
exit	Exits to the next higher level.
key <hexadecimal>	Sets key.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punctuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains spaces.
key text <text>	Sets key.
	Each byte is represented by a single character.
	Note that quotes must enclose the value if it contains spaces.
no key	Removes key.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
write	Stores the current configuration in permanent memory.

PremierWave EN Command Reference 182