Acer G330 Series Onboard LSI Sata RAID configuration, Enabling the onboard LSI Sata RAID function

107

Onboard LSI SATA RAID configuration

This section briefly shows how to create a RAID 1 volume using the onboard LSI SATA RAID function.

Enabling the onboard LSI SATA RAID function

1Turn on the server and the monitor.

2During POST, press F2 to access the BIOS Setup Utility.

3Select the Advanced IDE Controller submenu.

4Change the setting of the Configure SATA as RAID field to Enabled.

The SATA RAID OPROM field will appear.

5Change the setting of the SATA RAID OPROM field to LSI.

6Press F10, and select Yes to save the new SATA RAID settings and close the Setup Utility.

Entering the onboard LSI RAID Configuration Utility

During POST, press Ctrl-Ein the Intel Embedded Server RAID Technology information screen.

Loading the onboard LSI SATA RAID default setting

1In the onboard LSI RAID Configuration Utility, select Objects from the Management menu.

2Select Adapter from the Objects list.

The available adapter options will be displayed.

3Press Enter in the adapter list.

The adapter settings will be displayed.

4Select Factory Default, then YES to load the default settings.

5Close the configuration utility.

6Press Ctrl+Alt+Del to reboot the system.