90 | 5 System troubleshooting |
Component troubleshooting
Listed below are specific problems that may arise during the use of your server and their possible solutions.
Power indicator does not light.
Do the following:
•Make sure the power supply module is properly installed.
•Make sure the power cord is connected correctly.
•Make sure that the wall outlet has power. Test it by plugging another device.
•Make sure the power indicator on the front panel is lit up green.
•Remove all
If reboot is successful, install the cards back in one at a time with a reboot between each addition to determine if one of them is causing the problem.
•Make sure that you have correctly installed system compliant memory modules, and that the system DIMM population guidelines were observed.
•Make sure that you have installed a system compliant processor.
FDD activity indicator does not light.
Do the following:
•Make sure the FDD data and power cables are properly connected.
•Check that relevant switches and jumpers for the FDD are set correctly.
•Check that the FDD is properly configured.
