43
To install memory module:
1Perform steps 1 through 3 of the previous section.
2Select an empty DIMM slot.
3If necessary, open the holding clips of the selected DIMM slot.
4Remove the new memory module from its protective packaging, handling it by the edges.
5Install the new memory module.
(1)Align the module so that the notch on the slot fits the keyed edge of the module, then press the module at both ends until the retaining clips snap into place.
If you insert a module but it does not fit easily into the slot, you have inserted it incorrectly. Reverse the orientation of the module and insert it again.
(2)Make sure to firmly press the retaining clips inward to lock the module in place.
If the holding clips do not close, the module is not properly inserted.
6Observe the
The system automatically detects the amount of memory installed. Run the BIOS setup utility to view the new value for total system memory.
