27
Opening the server
Caution: Before you proceed, make sure that you have turned off the system and all peripherals connected to it. Read the
You need to open the server before you can install upgrade components. The front bezels and (left) side panel are removable to allow access to the server’s internal components. Refer to the following sections for instructions.
Removing the side panel
1Perform the
2Open the HDD bay bezel.
(1)If necessary, insert the key into the lock and turn it counterclockwise until it points to the unlock icon.
(2)Open the lower bezel to a 90° angle.
3Remove the side panel.
(1)Loosen the two screws located on the rear edge of the side panel.
(2)Move the side panel release latch all the way down to unfasten the panel from the chassis.
