34 | 3 System upgrade |
4Align the new hard disk with the HDD carrier, then secure it with the four screws you removed in step
5Install the new hard drive into the cage.
(1)Slide the drive into the cage with the ejector lever still extended.
(2)Make sure that the drive is properly inserted before pushing the lever back until it clicks into place.
To install an easy-swap hard drive:
1Remove the side panel from the chassis. Go to page 27 for instructions.
2Observe steps 2 through 5 of the previous section.
3Connect the data and power cables to their HDD connectors.
4Observe the