5: Commands and Levels

 

 

default tcp keep alive

Restores the default 45 second connect mode TCP keep alive

 

timeout.

exit

Exits to the next higher level.

no address

Removes the remote host address used to establish tunneling

 

connections.

no aes decrypt key

Removes the connect tunnel AES decrypt key.

no aes encrypt key

Removes the connect tunnel AES encrypt key.

no credentials

Clears the RSA/DSA certificate selection.

no port

Removes the remote port used to establish tunnel connections.

no ssh username

Removes the SSH user name.

no tcp keep alive

Disables the connect mode TCP keep alive timeout.

no vip name

Removes the VIP name.

port <number>

Sets the remote port to use for connect mode tunneling.

 

<number> = number of the port to use.

protocol ssh

Uses SSH protocol for connect mode tunneling.

protocol ssl

Uses SSL protocol for connect mode tunneling.

protocol tcp

Uses TCP protocol for connect mode tunneling.

protocol tcp aes

Uses TCP protocol with AES encryption for connect mode tunnel-

 

ing.

protocol telnet

Uses Telnet protocol (with IAC) for connect mode tunneling.

protocol udp

Uses UDP protocol for connect mode tunneling.

protocol udp aes

Uses UDP protocol with AES encryption for connect mode tunnel-

 

ing.

show

Shows the current configuration.

show history

Displays the last 20 commands entered during the current CLI

 

session.

show statistics

show connection statistics

ssh username <text>

Sets the SSH user name for use when establishing tunneling

 

connections

 

with other devices.

 

<text> = SSH user name.

tcp keep alive <milliseconds>

Enables TCP keep alive for connect mode tunneling and sets the

 

timer.

 

<milliseconds> = timer value, in milliseconds.

validate certificate disable

Skips verification of the server certificate when connecting.

validate certificate enable

Requires verification of the server certificate when connecting.

vip disable

Makes connections using the specified Address.

vip enable

Makes connections using the VIP name.

vip name <text>

Sets the VIP name.

write

Stores the current configuration in permanent memory.

host 13 (tunnel-connect-host:1:13) level commands

address <text>

Sets the remote host to establish tunneling connections with.

 

<text> = IP address or host name of the remote host.

aes decrypt key <hexadecimal>

Sets the connect tunnel AES decrypt key with up to 16 bytes.

 

Each byte is represented by two adjacent hex digits.

 

Bytes may run together or be separated by optional punctuation:

 

123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc

 

Note that quotes must enclose the value if it contains spaces.

aes decrypt key text <text>

Sets the connect tunnel AES decrypt key with up to 16 bytes.

PremierWave EN Command Reference

117

Page 117
Image 117
Lantronix 900-581 manual Host 13 tunnel-connect-host113 level commands