Lantronix 900-581 Cp email-cp1 level commands, Cp output tunnel-connect-cpoutput3 level Commands

	5: Commands and Levels
write	Stores the current configuration in permanent memory.
cp (email-cp:1) level commands
clrscrn	Clears the screen.
exit	Exits to the next higher level.
group <text>	Specify a CP group that shall trigger an email.
	<text> = configurable pin group.
no group	Disables the trigger to send an email.
no trigger value	Clears the value that shall trigger an email.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
trigger value <number>	Specify a value of the CP group that shall trigger an email.
	<number> = numeric value to watch for from the CP group. Can
	be specified as
	hex if prepended with “0x”.
write	Stores the current configuration in permanent memory.
cp output (tunnel-connect-cp_output:3) level	commands
clrscrn	Clears the screen.
connection value <number>	Sets the value to output to the CP Group upon connect mode
	connection.
	<number> = binary to output (typically 1 or 0).
default connection value	Restores the default value for connect mode connection.
default disconnection value	Restores the default value for connect mode disconnection.
disconnection value <number>	Sets the value to output to the CP Group upon connect mode
	disconnection.
	<number> = binary to output (typically 1 or 0).
exit	Exits to the next higher level.
group <text>	Configures the CP Group to set upon making or breaking a con-
	nect
	mode connection.
	<text> = CP Group.
no group	Removes the CP Set Group for connect mode.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current CLI
	session.
write	Stores the current configuration in permanent memory.
cp output (tunnel-accept-cp_output:3) level commands
clrscrn	Clears the screen.
connection value <number>	Sets the value to output to the CP Group upon accept mode con-
	nection.
	<number> = binary to output (typically 1 or 0).
default connection value	Restores the default value for accept mode connection.
default disconnection value	Restores the default value for accept mode disconnection.
disconnection value <number>	Sets the value to output to the CP Group upon accept mode dis-
	connection.
	<number> = binary to output (typically 1 or 0).
exit	Exits to the next higher level.
group <text>	Configures the CP Group to set upon making or breaking an ac-
	cept

PremierWave EN Command Reference 70