Printronix ThermaLine Series manual Code 39 Command Format, Mag, Hn.m

Code 39 Command Format

NOTE: Although commonly referred to as Code ª39,º you must enter the command as ªC3/9º (including the slash) during IGP/PGL input.

BARCODE

C3/9 [CD]; [VSCAN;] [MAG;] [Hn[.m];] [BFn;L;] [DARK;] SR; SC [(D)data field(D)]

[PDF [;LOC] [;FONT]]

STOP

BARCODE	The Bar Code command; enter BARCODE.
C3/9 CD	Designates bar code type C39; enter C3/9. To calculate
	and plot the optional modulo±43 check digit with the
	bar code symbol automatically, enter CD.
VSCAN	Optional parameter to orient the bar code structure
	vertically. To select a vertical bar code, enter VSCAN.
	If VSCAN is not entered, the bar code is oriented
	horizontally.
MAG	Optional parameter to magnify (horizontally expand)
	the bar code symbol. The magnification default value
	is X1. As required for scanning, enter a magnification
	value to increase the magnification. Increasing the
	magnification adjusts printed character density.
	You can also use XR or XRD as defined on page 5±4.
Hn[.m]	Optional parameter to adjust the overall height
	(vertical expansion) of the bar code symbol (including
	the upper and lower 0.1± inch guard bands and any
	human readable data). Height adjustments are made in
	0.1±inch increments plus dots; enter H and a value
	from 4 to 99 to select height adjustments from 0.4 to
	9.9 inches. The default value is 0.9 inch.
	.m is an additional number of dots for the bar code
	height. (Dots are in the current dot scale.)

Bar Codes 5±23