Printronix ThermaLine Series manual Loc, ±15. Left Side Data Field Format

PDF	Optional parameter which affects printing of the
	human readable data field. The data field will print
	automatically in the OCR±B font (default) unless the
	PDF±suppress command is specified in the FONT
	parameter. The human-readable data field can be
	printed above or below the bar code symbol. This
	parameter is not allowed if a null data field is
	specified.
LOC	Optional parameter to identify the location of the
	printable data field. The default value is B, locating the
	human readable data below the bar code. A locates the
	printable data field above bar code. To compensate for
	printing the 0.1±inch high data, the height of the bar
	code body is reduced 0.1 inch.
FONT	Optional parameter to select the font for the human
	readable data field. The default value, N, selects the
	normal ASCII 10 cpi font. Enter O to select the
	OCR±A 10 cpi font; enter X to select the OCR±B type
	font; enter S to suppress printing the data field and the
	trailing lower portions of the EAN bar code.
STOP	Ends the Bar Code command while the IGP/PGL
	continues in the Create Form Mode. Enter STOP. If
	STOP is not entered, an error message results.

Table 5±15. Left Side Data Field Format

Number System		Format for Left Side Data Field Positions
CharacterValue	12	11	10	9	8	7
0	A	A	A	A	A	A
1	A	A	B	A	B	B
2	A	A	B	B	A	B
3	A	A	B	B	B	A
4	A	B	A	A	B	B
5	A	B	B	A	A	B
6	A	B	B	B	A	A
7	A	B	A	B	A	B
8	A	B	A	B	B	A
9	A	B	B	A	B	A

Bar Codes 5±69