Printronix ThermaLine Series manual Startdata

RPTn	The optional incremental repeat count parameter to
	specify the number of times a particular field value is
	repeated before it is incremented. A repeated field
	value is useful when printing multiple rows/columns of
	identical labels before incrementing to the next value.
	To use the repeat count parameter, enter RPT and
	replace n with a numeric value ranging from 1 to
	65,535 to specify the repeat count. The default repeat
	count parameter is 1, which will increment the field
	value each time it is printed.
RSTn	The optional incremental reset count parameter to
	specify the number of times an incremented field is
	printed (on one or more forms) before it is reset to the
	starting value. A reset count is useful when printing a
	hierarchy of fields where a low±level field generates a
	sequence of numbers, is reset, and the next higher field
	level is incremented (such as in a unit/box/carton
	application).
	To use the reset count parameter, enter RST and
	replace n with a number ranging from 1 to 65,535 to
	specify the reset count. The default reset count value
	is 0.
STARTDATA	Defines the starting value of the incrementing field.
	The maximum amount of STARTDATA characters
	must be equal to or less than the number of characters
	in the STEPMASK field. If the number of data
	characters in dynamic alphanumeric data commands is
	less than the number used in STEPMASK, the data
	will print right justified with preceding spaces.
	(Leading spaces are not provided for bar code data.)
	For dynamic bar code data, the type of characters
	allowed for incrementing fields is based on the type of
	bar code. Refer to the individual bar code descriptions
	in the ªBar Codesº chapter for information on valid
	type and quantity of data characters. The STARTDATA
	must be enclosed within standard printable character
	delimiters just as a standard data field is enclosed
	within delimiters.

4±58 Commands