Printronix ThermaLine Series Not print, Printable data field above the bar code. To compensate

SC	Defines the starting column of the bar code. Enter a
	value ranging from column 1 to one less than the width
	of the form. Character column or dot column is
	specified based on the Scale command (page 4±88), or
	use the CP.DP format (page 4±7).
D	The printable character (delimiter) identifying the start
	and finish of the data field. Enter any printable
	character other than a slash (/), the SFCC, or a
	character used within the data. The same character
	must be used at both ends of the data field, but it will
	not print with the data.
data field	Enter the characters for the bar code data. A null data
	field (no characters) is permitted. The length of the
	data field is variable; however, a maximum of 14 data
	characters are allowed if a one±character check digit
	field is specified; a maximum of 13 data characters are
	allowed if a two±character check digit field is
	specified.
	The characters available for the data field are 0 through
	9 (30 through 39 hex, respectively).
PDF	Optional parameter to enable printing of the human
	readable data field. Enter PDF to print the data field. If
	the parameter is not used, the human readable data will
	not print.
LOC	Optional parameter to identify the location of the
	printable data field. The default value is B, locating the
	human readable data below the bar code. A locates the
	printable data field above the bar code. To compensate
	for printing the 0.1±inch high data, the height of the
	bar code body is reduced 0.1±inch.

Bar Codes 5±89