Printronix ThermaLine Series manual Execute format or delimiter error

77EXECUTE format or delimiter error

A format or delimiter error was detected in the Execute command; the IGP/PGL will automatically revert to the Normal mode. This error is usually caused by one or more of the following:

a.A missing semicolon;

b.A colon in place of a semicolon;

c.Too many or too few parameters in the command string;

d.Alpha characters instead of decimal digits in the parameters;

e.Page command misspelled when specifying the page number.

78Insufficient memory to EXECUTE the form

Insufficient memory was available to recall and execute a form. The IGP/PGL will automatically revert to the Normal mode.

79Not defined.

Error Codes 8±15