Printronix ThermaLine Series manual ±3. USET±ISET Relationship, ~USET1

The USET and ISET commands are related as shown in Table 7±3. Therefore, ISET;24 selects the substitution set defined as USET1, ISET;29 selects USET6, etc.

Table 7±3. USET±ISET Relationship

USETn

n = 1 n = 2 n = 3

n = 4 corresponds to n = 5

n = 6 n = 7 n = 8

ISET;n

n = 24 n = 25 n = 26 n = 27 n = 28 n = 29 n = 30 n = 31

Example The following example defines User Set 1 to contain the Multinational font addresses B1 (±), A1 (¡), and BF (¿) at the hex cell addresses 23, 24, and 25, respectively. Therefore, if ca = 23 and fa = B1, each time that cell address 23 is received, it will select the character located at font address B1 (±).

~USET1

23;B1

24;A1

25;BF

END

User Set 1 now contains the following: the plus or minus sign ± (B1 hex) in place of the number sign # (23 hex); the upside down exclamation point ¡ (A1 hex) in place of the dollar sign $ (24 hex); and the upside down question mark ¿ (BF hex) in place of the percent sign % (25 hex). To print User Set 1, you must use the ISET command discussed on page 7±10.

Multinational Character Sets 7±9